2019 Exmark Lazer Z E-Series LZE751GKA604A1

Selling Price -

$6,500.00

Information

No Description is Available for this Unit

Photos

Highlights

  • $6,500.00
  • Bowling Green Tractor
  • Pre-Owned
  • 22979
  • 2019
  • Exmark
  • Lazer Z E-Series LZE751GKA604A1
  • 405520485
  • Brand: Kawasaki® | Model: FX751V | Series: V-Twin
  • Gas Carbureted | Indicator: Yes - electronic Sender
  • Available
  • 72.8 in. (184.9 cm)
  • 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.

Specifications

  • 2019
  • Exmark
  • Lazer Z E-Series
  • LZE751GKA604A1
  • Zero-Turn Mower
  • Brand: Kawasaki® | Model: FX751V | Series: V-Twin
  • 852
  • 3,750 RPM
  • Heavy-duty canister air filtration system
  • Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Gas Carbureted | Indicator: Yes - electronic Sender
  • Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. | Wheel Release: Allows unit movement without engine running.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Lever-actuated disc brake.
  • Drive: 24 x 12-12, 4 ply Super Turf® | Caster: 13 x 6.50-6, smooth-tread, semi-pneumatic.
  • Drive: 24 x 12-12, 4 ply Super Turf®
  • 12-volt battery with 15-amp alternator.
  • Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
  • Blade: Approximately 18,500 fpm.
  • Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Blade: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
  • 60"
  • 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • 83.1 in. (211.1 cm) | Blades: 3 Blades at 20.50"
  • 72.8 in. (184.9 cm)
  • 8-gallon (30.3-L) single fuel tank with single fill location.
  • Standard Features: Engine hour meter and cup holder | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Casters: .50" thick caster yoke arms.
  • Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Floating Deck | Full-floating UltraCut Series 4. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.